RAV-MS-4x2DLHU-Tx/Rx – 4×2 USB-C & HDMI Matrix Switcher with HDBT 3.0 & USB 3.2

Coming Soon! See the launch at Infocomm. 

Unlock your meeting room’s potential  with the RAV-MS-4x2DLHU-TxRx.
This presentation auto-switcher extender and first launch of a product that supports HDBaseT video 3.0 and USB 3.2 Gen 1 over Cat6, features four inputs on the transmitter and three inputs on the receiver.
Output is to two independent HDMI displays at a distance of 100 metres. USB-C inputs are fully featured, supporting DP-Alt mode for extended screen, charging at up to 100w, and 1G Ethernet. In addition with the device’s auto-switching and USB hub host/device access, the RAV-MS-4x2DLHU-TxRx will meet the demands of professional installations.

Category: Matrices

Description

Coming Soon! See the launch at Infocomm. 

The RAV-MS-4x2DLHU-TxRx is a dual HDBaseT presentation auto-switcher extender and first launch of a product that supports HDBaseT video 3.0 and USB 3.2 Gen 1 over Cat6.
Featuring four inputs on the transmitter and three inputs on the receiver it can then output to two independent HDMI displays.
USB-C input is fully featured, supporting DP-Alt mode for extended screen at a distance of 100m, charging at up to 100w, and 1G Ethernet.
Designed for high-demanding environments, with analogue audio embedding & de-embedding, RS-232 & IP control, GPI/O, IR Learning, EDID management, dual 1Gb LAN with 802.1x, VLAN and Power-over-Cabe means the RAV-MS-4x2DLHU-TxRx meets today’s video & audio extension challenges.

User Manual

User Manual.pdf

Specification Sheet

Specification Sheet.pdf

Product Brochure

Product Brochure.pdf

Additional information

Inputs:

Tx: 2x USB-C,1x USB-C (data), USB-B, 2x HDMI, USB-C (firmware), 2x USB-A (device), USB-C (device), IR In/learner, 2x RS-232, 4x GPI/O, Balanced / Unbalanced audio input, 2x 1Gb Ethernet, 24V DC power.
Rx: HDBaseT video, HDBaseT USB, 2x HDMI, USB-B (host), 2x USB-A (device), USB-C (device), 2x RS-232, 1Gb Ethernet, 24V DC power.
Outputs:

Tx: HDBaseT, video, HDBaseT USB, HDMI, Balanced / Unbalanced audio output.
Rx: 2x HDMI, IR Out, Balanced / Unbalanced audio output.
Features:

HDBaseT 3.0 and USB 3.2 extension.
HDBaseT 3.0 4K60 and USB 3.2 Gen 1 over dual Cat6A cables up to 100m/328feet.
USB-C full features with DP-Alt mode up to 4K60Hz 4:4:4 (DP 1.4a, HDCP 2.3), USB 3.2 Gen 1 (5Gbps), 1G ethernet and 100 watts charging.
HDMI up to 4K60Hz 4:4:4 (HDMI 2.0b, HDCP 2.3).
Fast switch with auto and manual switching modes.
Auto switch supports signal and 5V detection.
USB 3.2 Gen 1 (5Gbps) host and local hub.
USB 3.2 connectivity with data transfer rates up to 5Gbps.
Backwards compatible with USB 2.0 and 1.1.
Hardware acceleration for isochronous and bulk transfer.
USB 3.2 Gen 1 (5Gbps) device with 5V/1.5A power out.
Balanced/un-balanced analogue audio input embedded to HDMI audio or USB audio.
Balanced/un-balanced analogue audio de-embedded from HDMI audio or USB audio.
EDID management.
User defined welcome screen image.
Dual 1G Ethernet ports with 802.1x and VLAN.
IR eye for IR learning and control.
Auto display on/off control.
External device control through CEC/IR/RS-232/TCP/GPIO.
Front panel button, RS-232, TCP/IP and Web GUI control.
The 3rd party control system driver included.
Supports bi-directional 24V PoC (power over cable), when TX or RX gets power, the other end does not need an external power supply (USB-C charging power from TX power supply only).
Country of Origin.

China.

Customers also viewed