RAV-EX-UAC100-TxRx : USB 3.2 over Cat. 6A/7 Transmitter & Receiver. 100m (2 USB-A & 2 USB-C Ports)

RAV-EX-UAC100-TxRx is a USB extender that can transmit USB 3.2 Gen1 signals over Cat6a/7 up to 100 metres, supporting data transfer rates up to 5Gbps.
The transmitter features one USB-C port for the USB host device and 1x USB-A & 2x USB-C device ports. The receiver has 2x USB-A & 2x USB-C device ports.
It can be widely used to connect USB devices such as cameras, microphones, mass storage, printers, keyboard & mouse to a single computer.
The devices supports bi-directional PoC allowing the device to be powered from the transmitter or receiver.
Supplied with power supply, and mounting brackets.

Category: Extenders

Description

Extend USB 3.2 Signal with Ease

Connect multiple USB-C and USB-A peripherals and devices to a single USB-C host over one Cat6a cable to 100m/

  • Extension of USB 3.2 Gen1 up to 100m/328ft over Cat6a cable.
  • Data transfer rate of 5Gbps.
  • Backwards compatible with USB 2.0 & USB 1.1.
  • Bi-directional 24V PoC (Power over Cable) when Tx or Rx gets power.
  • Plug-and-play with no drivers, downloads or software required.

Additional information

Inputs:

Tx: 1x USB-C host, 4-pin Phoenix, USB Micro-B (firmware updates), Locking DC/12V (5.5 / 2.1mm).
Rx: 1x RJ-45, 4-pin Phoenix, USB Micro-B (firmware updates), Locking DC/12V (5.5 / 2.1mm).
Outputs:

Tx: 1x USB-C, 2x USB-A 1x RJ-45.
Rx: 2x USB-C, 2x USB-A,
Signal and Bandwidth:

Up to USB 3.2 Gen1. Backwards compatible with USB 3.0 / 2.0 / 1.1.
5Gbps maximum bandwidth.
Features:

Bi-directional PoC (Power over cable)
RS-232 & FSYNC transmission pass-through.
Hardware acceleration for isochronous and bulk transfer.
Plug and Play (no device drivers necessary) and is compatible with multiple operating systems.
Country of Origin:

China

Customers also viewed